Our products are meticulously sourced from Australia and around the world. Not only do we offer day to day lighting products and custom made fittings, but LOA also supplies the best architectural lighting systems available, as well as modern design based decorative lights and highly specialised & technical luminaires.
All of our partners incorporate cutting edge LED lighting technology and sustainable lighting solutions. At LOA, we continue to search out and launch new, unique, eco friendly products that are top of the line in both design and quality in the Australian lighting market. We are proud to have the following partners EXCLUSIVELY available at Lighting Options Australia:
Our Exclusive Brands
ERCO specialises in producing engineering hardware and software for architectural lighting. First and foremost, they describe themselves as selling light, not luminaires. This approach, which places the immaterial "software" of light above the physical hardware of the luminaires, has been the trademark of their work for many years.
ERCO have dubbed themselves "The Light Factory" and here at LOA, we couldn't agree more. Their products and approach are second to none.
BEGA has developed and produced high-quality luminaires for almost all areas of architecture for more than six decades. During this time, products, their concept and trademarks have become a generic term for many luminaires in the entire industry. The light brick trademark has formed part of our programme for over 50 years. We have focused on in-ground lighting intensively for more than 40 years. We ourselves have established many of the valid criteria which are used as the basis for judging the quality of this group of luminaires.
We are familiar with the extreme conditions outdoor luminaires are subject to. They are exposed to dirt, weather factors and extreme fluctuations in temperature. More than any other luminaires, they are required to withstand a high degree of physical stress. We ourselves have created the best technology and production processes to more than meet these requirements. They were not the result of a series of regulations but of our learning process, and form an integral part of our quality concept. This know-how is part of our experience and defines our daily approach to the development of new luminaires and new product ideas.
Coolon LED products are exclusively developed and manufactured in Australia to meet local and international standards. Coolon’s range of lighting integrates advanced thermal management, short circuit and open circuit protection and many other innovative features. All products undergo rigorous testing during the development and manufacturing process and before leaving the factories.
Coolon’s history, experience and approach to engineering and manufacturing of LEDs ensure that their products stand out amongst its competitors and are the highest quality LED lights available on the market.
Australian Made. Nocturnal Lighting is a high quality LED light fitting manufacturing business located on the northern beaches of Sydney Australia.
All fittings are handcrafted in-house out of the finest quality materials and assembled with precision.
Nocturnal has built a reputation for delivering the finest interior and exterior LED light fittings.
If you promise your clients bespoke, high-tech, quality products, you can’t have them made just anywhere. PROLICHT manufacture their products where their heart beats and qualified technicians, engineers and designers find themselves at home: right in the middle of the Tyrolean Alps. At the end of the day, it is their skill that makes a difference. And it is their expertise that has made PROLICHT one of the world’s most successful premium manufacturers of architectural lighting concepts. Sustainably produced and custom-made in the centre of Europe.
With PROLICHT lighting solutions, there are no limits to your creativity. Starting with the shape and size of the luminaire, through freely selectable colours to a great variety of lens and reflector technologies, PROLICHT are committed to providing you with infinite possibilities.
AEC products are the result of a multidisciplinary project which takes place within the modern workspaces dedicated to the production units and to the sophisticated laboratories where security and performance are tested by qualified and constantly up-dated staff.
The Company's philosophy, based on the concept of "total quality system," predicts the concentration of all the production phases in the Italian headquarters: from the designing to the production and distribution of the product.
The high-tech machines and the sophisticated automation processes are part of an ambitious project of which AEC can be proud.
Investment on the technological up-grade of the product coincides with the care dedicated to the research of shapes and aesthetics and the concept of quality is blended, with no exceptions, to those of functionality and exclusiveness and with the care for detail typical of products made in Italy.
Established in 1957, Reggiani is now an International benchmark in the lighting industry, a community of lighting experts that provides its customers with cutting-edge technological solutions with an open, collaborative and problem solving approach.
The constant development of innovative products and the expertise gained in over 60 years of activity in the field has outlined an increasingly open exchange with the world of lighting designers and architects, with whom Reggiani has established a relationship funded on sharing ideas and best practices and to whom Reggiani provides solutions and support to meet any creative requirement.
A family run business means an eye for detail, exceptional service levels and a strong personal contact. The client’s satisfaction is always the first goal.
We are open-minded, accessible and globally connected. We support our clients at every step of their project journey. We bring new and inspiring ideas and solutions to our clients. We share our knowledge and experience, adding that little extra that will make a difference.
Incorporated in the UK in 1986, IBL pioneered the development of electronic lighting control equipment. By the late 1980s, most major UK and European lighting manufacturers were using IBL's control equipment. By the early 1990s, IBL Lighting had sold over 60 million electronic transformers worldwide.
The IBL lighting range represents the best of what the company embodies. IBL is driven by a mix of architectural lighting and engineering advances. Our clients continue to inspire us to develop solutions that utilise and embrace the latest technology in architectural lighting.
Why ZALUX is your reliable partner for safe luminaires suitable for Ex-szones?
40 years experience
Specialised in the development and manufacturing in Europe
of luminaires with high protection ratings. Our solutions have
been installed in chemical, oil & gas or heavy industries in more
than 70 countries.
Zalux luminaires comply with ATEX – IECEX standards, as well
as CE and ROHS marks. Their quality is the result of reliable
processes and consistent testing.
We are a registered vendor in major EPC companies and oil and
gas end users globally. Our processes and products comply with
the strict requirements of the most demanding industries.
Our experienced team cares for the conntinuos improvement
of our luminaires and is at your disposal to help you find the
appropriate lighting solution for each project.
Compliance with electrical, temperature or resistance
tests, some of which are carried out in our laboratories,
together with fully sealed products up to IP69K, guarantee
that Ex-certified luminaires are suitable for hazardous areas
where strict ATEX specifications must be met.
We choose high quality materials for each application, from
impact resistant PMMA, borosilicate glass or 316L stainless
steel, among others, to offer maximum robustness.
EX luminaires are used during long times in challenging
locations, so they offer a great resistance to acids, sulphur
or salty environments.
Optimal thermal management allows a long lifetime.
This why ZALUX is your reliable partner for
safe luminaires suitable for Ex-zones.
Gardens at Night is an Australian owned company specialising in the design and manufacture of quality, energy efficient outdoor lighting. Our comprehensive range of lights and accessories offer a complete solution for every outdoor space; setting standards in the industry for technology, functionality and durability.
For over 20 years, we have partnered with leading landscape designers, architectural specifiers and design-savvy home owners, bringing projects to life through the creative use of outdoor lighting.
In 2019 we partnered with leading lighting professionals across Australia who are experts in the specification of outdoor lighting for residential and commercial projects. With this company growth and expanded network, our commitment to provide quality service and increase accessibility of our product range could be supported at a local level.
YAMAGIWA, founded in 1923, is the leading Japanese manufacturer of lighting
with its Japanese precision and innovative design,
by collaborating with acclaimed international designers and architects.
Under the tagline of “The Art of Lighting,” YAMAGIWA has been manifesting beautiful living surroundings
and providing unrivaled value to the society through lighting.
The Planet Lighting design tradition heralds back to the early 1900s, when founder WA Iggulden set up Bentley Mfg Co in Melbourne to produce building tools to patented designs. Since the 1930s Planet has been manufacturing lights, including the iconic Australian classic, the Studio K desk lamp. Over the years, our facilities have expanded to include handblown artisan glassblowing facilities, a high tech LED laboratory and state of the art CNC equipment to ensure high quality in-house capability, and a comprehensive approach to lighting manufacturing.
Today, we are one of the leading Australian suppliers of Medical & Surgical lights, LED and custom lighting solutions and are uniquely placed to provide the expertise and know-how required to work with lighting designers and specifiers to realise creative custom lighting ideas and concepts.
XD, pronounced ‘Cross Ditch’, is a leading range of Architectural Linear Profiles manufactured in Australia using high quality components.
XD profiles use Aluminium extruded in New Zealand, where the majority of energy is generated from renewable energy sources. What’s more, XD profiles last longer and use less energy to run.
XD profiles use the best LEDs available on the market making colours more vibrant, spaces brighter and lives richer.
Previously known as Studio Italia Design, Lodes completed a rebrand process in June 2020 — on the occasion of its 70th anniversary — which culminated with the unveiling of the new logo and brand identity. Since then, as part of a strategic vision led by General Manager Massimiliano Tosetto, Lodes has been heralding a new era of contemporary design celebrating the company’s manufacturing know-how and high-quality Made in Italy essence.
Nanoleaf is a pioneer in modern smart home, paving the way by continuously working to redefine the space. We achieve this by following one simple rule: if something already exists on the market, we won’t do it—unless we can do it better.
By “rethinking what’s possible” and pursuing constant innovation with our technology and designs, at Nanoleaf we are able to create products unlike anything ever seen before and explore the potential of what smart home can truly be.
Lighting Options Australia has officially teamed up with award industry leader and award winning LED manufacturer, Soraa. Before Soraa, all LEDs worldwide were made of GaN crystals grown onto a dissimilar substrate: usually sapphire or silicon carbide.
Today, Soraa is the only LED manufacturer using perfect GaN on GaN™ crystals for its products. Only Soraa creates GaN on GaN™ lighting products for tomorrow’s general illumination market. Perfect crystals mean perfect light. Lighting Options Australia are an official Australian reseller and have excellent stock holdings.
TRILUX follows one main objective: making light better and better, both for people and the environment. A vision with responsibility that TRILUX approaches with state-of-the-art LED innovation and continuous optimisation of energy efficiency.
TRILUX creates new trends, again and again. Or put another way: New Light.
LIGHTKIT is an Australia based niche lighting manufacturing and supply company that works with architects and designers to ensure aesthetics, performance and flexibility of function are equally thought out in every lighting kit they design—and engineers, electrical contractors and distributors to find innovative ways to bring high performance lighting at competitive pricing for hospitality and luxury lifestyle markets.
Partnering with a wide variety of experts in the lighting, design and architecture industries allows LIGHTKIT to keep evolving to meet the ever-changing needs of the people who purchase, use and benefit from the lighting they supply.
At Survivor Lighting, their mission is to raise the benchmark in the specialist market of vandal resistant and weatherproof lighting systems.
Their commitment is to provide custom and robust lighting systems that exceed client expectations, are delivered on time, to specification and within budget.
Evolve is Lighting Options Australia’s in house brand. High quality, mid-priced luminaires are sourced from Australia and around the globe offering very unique fixtures that satisfy a range of day to day lighting solutions.